v23990-p589-a31-pm preliminary datasheet flowpim 1 3rd gen 1200v / 25a v geon 15 v v geof f -15 v r g on 16 ? r goff 16 ? figure 1 igbt figure 2 fred typical average static loss as a functi on of output current typical average static loss as a function of output current p loss = f(i out )p loss = f(i out ) at at t j = 125 c t j = 125 c mi*cos from -1 to 1 in steps of 0.2 mi*cos from -1 to 1 in steps of 0.2 figure 3 igbt figure 4 fred typical average switching loss typical average switching loss as a function of output current p loss = f(i out ) as a function of output current p loss = f(i out ) at at t j = 125 c t j = 125 c dc link = 600 v dc link = 600 v f sw from 2 khz to 16 khz in steps of factor 2 f sw from 2 khz to 16 khz in steps of factor 2 = 3phase spwm general conditions output inverter application = = = mi*cosfi = -1 mi*cosfi = 1 0 10 20 30 40 50 60 70 0 5 10 15 20 25 30 35 40 45 50 iout (a) ploss (w) mi*cosf i= -1 mi*cosfi = 1 0 10 20 30 40 50 60 0 5 10 15 20 25 30 35 40 45 50 iout (a) ploss (w) fsw = 2khz fsw = 16khz 0.0 5.0 10.0 15.0 20.0 25.0 30.0 35.0 40.0 45.0 0 5 10 15 20 25 30 35 40 45 50 iout (a) ploss (w) fsw = 2khz fsw = 16khz 0.0 5.0 10.0 15.0 20.0 25.0 30.0 0 5 10 15 20 25 30 35 40 45 50 iout (a) ploss (w) copyright vincotech 1 r evision: 1
v23990-p589-a31-pm preliminary datasheet flowpim 1 3rd gen 1200v / 25a figure 5 phase figure 6 phase typical available 50hz output current typical available 50hz output current as a function mi*cos i out = f(mi*cos ) as a function of switching frequency i out = f(f sw ) at at t j = 125 c t j = 125 c dc link = 600 v dc link = 600 v f sw = 4khz mi*cos = 0.8 t h from 60 c to 100 c in steps of 5 c t h from 60 c to 100 c in steps of 5 c figure 7 phase figure 8 phase typical available 50hz output current as a function of typical available 0hz output current as a function mi*cos and switching frequency i out = f(f sw , mi*cos ) of switching frequency i outpeak = f(f sw ) at at t j = 125 c t j = 125 c dc link = 600 v dc link = 600 v t h = 80 c t h from 60 c to 100 c in steps of 5 c mi = 0 output inverter application th = 60c th = 100c 0 5 10 15 20 25 30 35 -1.0 -0.8 -0.6 -0.4 -0.2 0.0 0.2 0.4 0.6 0.8 1.0 mi*cos iout (a) th = 60c th = 100c 0 5 10 15 20 25 30 35 1 10 100 f sw (khz) iout (a) 1 2 4 8 16 32 64 -1.00 -0.80 -0.60 -0.40 -0.20 0.00 0.20 0.40 0.60 0.80 1.00 iout (a) 30.0-33.0 27.0-30.0 24.0-27.0 21.0-24.0 18.0-21.0 15.0-18.0 12.0-15.0 9.0-12.0 6.0-9.0 3.0-6.0 mi*cosfi fsw th = 60c th = 100c 0 5 10 15 20 25 30 35 1 10 100 f sw (khz) iout (apeak) copyright vincotech 2 revision: 1
v23990-p589-a31-pm preliminary datasheet flowpim 1 3rd gen 1200v / 25a figure 9 inverter figure 10 inverter typical available peak output power as a function of typical efficiency as a function of output power heatsink temperature p out =f(t h ) efficiency=f(p out ) at at t j = 125 c t j = 125 c dc link = 600 v dc link = 600 v mi = 1 mi = 1 cos =0.80 cos =0.80 f sw from 2 khz to 16 khz in steps of factor 2 f sw from 2 khz to 16 khz in steps of factor 2 figure 11 inverter typical available overload factor as a function of motor power and switching frequency p peak / p nom =f(p nom ,f sw ) at t j = 125 c dc link = 600 v mi = 1 cos =0.8 f sw from 1 khz to 16khz in steps of factor 2 t h = 80 c motor eff = 0.85 output inverter application 2khz 16khz 0.0 2.0 4.0 6.0 8.0 10.0 12.0 14.0 16.0 60 65 70 75 80 85 90 95 100 th ( o c) pout (kw) 2khz 16khz 90.0 91.0 92.0 93.0 94.0 95.0 96.0 97.0 98.0 99.0 100.0 0.0 5.0 10.0 15.0 20.0 25.0 pout (kw) efficiency (%) switching frequency (khz) 100 150 200 250 300 350 400 motor nominal power (hp/kw) overload (%) 1 794 530 318 212 159 0 2 794 530 318 212 159 0 4 794 530 318 212 159 0 8 791 528 317 211 158 0 16 635 424 254 169 127 0 0,02 / 0,01 0,03 / 0,02 0,05 / 0,04 0,08 / 0,06 0,10 / 0,07 0,15 / 0,11 copyright vincotech 3 r evision: 1
v23990-p589-a31-pm preliminary datasheet product status definitions formative or in design first production full production disclaimer life support policy as used herein: the information given in this datasheet describes the type of component and does not represent assured characteristics. for tes ted values please contact vincotech.vincotech reserves the right to make changes without further notice to any products herein to i mprove reliability, function or design. vincotech does not assume any liability arising out of the application or use of any product o r circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. vincotech products are not authorised for use as critical components in life support devices or systems without the express wri tten approval of vincotech. 1. life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in labelling can be reasonably expected to result in significant injury to the user. 2. a critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. target product status datasheet status definition this datasheet contains the design specifications for product development. specific ations may change in any manner without notice. the dat a contained is exclusively intended for technica lly trai ned staff. preliminary this datasheet contains preliminary data, and supplementary data may be published at a later date. vincotech reserves the right to make changes at any time without notice in order to improve design. the data contained is exclusively intended for technically trained staff. final this datasheet contains final specifications. vincotech reserves the right to make changes at any time without notice in order to improve design. the data contained is exclusively intended for te chnically tr ained st aff. copyright vincotech 4 r evision: 1
|
